Mineral Water Production Lines

The standard diagrams of water treatment the standard diagrams of water treatment in the production of mineral water, bottled drinking water, water for the production of nonalcoholic beverages.

Mineral water must not undergo any working, which changes their composition (it will be no longer mineral water).
The mineral water undergoes in accordance with the "technological instruction on working and bottling of the drinkable mineral waters" OF TI 18-6-57-84:

• To mechanical cleaning for eliminating the suspensions

• To deironing for averting the precipitation of brown sediment during the storage

• To disinfection by ultraviolet irradiation and the addition of the ions of silver (silver plating).

Diagram of working mineral water

• Mechanical cleaning;

• Coarse filters, in such cases on the need sand filter

• The filters of thin the stonecrops (compulsorily before the ultraviolet irradiation)

• The deironing (desirably to the content of iron of 0,1 mg/dm³)

• Saturation by silver ions

Bottled drinking water Of Danfac 2.1.4. 1116-02.

It is let out of:

1.	Nongas 19, 5, 2-1,5 l, 0,5-0,33 l
2.	Gasified by 2-2,5, 0,5-0,33 l.

It can be, also, in another container.

The hardness of the nongas and gassed drinking water is recommended:

• For the drinkable purposes 1,2-2,0 mg of ekv/dm³ on the taste

• For the preparation of the food 0,3-0,5 mg of ekv/dm³ THE ABSENCE OF SCALE DEPOSIT

• The content of iron is not more than 0,1 mg/dm³

Depending on source and composition of initial water the following development stages (water treatment) adapt:

1.	Mechanical cleaning (sand filter, the filters of rough and fine purification)
2.	Deironing (if necessary)
3.	3.Softening (obtained hardness 0,1 mg of ekv/dm³). With the softening is necessary podmes the part of the water, which did not pass the stage of softening, for obtaining the necessary hardness (0,5-1,2-2,0 mg of ekv/dm³). For this in the system of control of installation softening is provided the bypass, possibly also the supply of not softened water through the surrounding line with the water meter and the gate
4.	4.Carbon filter (by necessity, especially with the presence of chlorine)
5.	5.Ultraviolet (UV) disinfection
6.	6.Saturation of water by silver ions, especially, the no gases water, for lengthening of period of storage.

Water for the production of nonalcoholic beverages accordance with the "technological instruction on the water treatment" (TI those of 10-5031536-7390 affirmed to 20.12.90) water for the production of nonalcoholic beverages must have the following indices:

• Hardness is not more than 0,7 mg of ekv/dm³

• Alkalinity is not more than 1 mg of ekv/dm³

• Iron of 0,1 mg/dm³

Depending on source and composition of initial water the following development stages (water treatment) adapt:

• Mechanical cleaning (sand filter, the filters of rough and fine purification)

• Deironing (if necessary)

• Softening (obtained hardness 0,1 mg of ekv/dm³)

With the softening is necessary podmes of the part of the water, which did not pass the stage of softening, for obtaining the necessary hardness (0,7 mg of ekv/dm³).

For this in the system of control of the installation of softening is provided the by pass, possibly also the supply of not softened water through the surrounding line with the water meter and the gate.

• Carbon filter (by necessity)

• Ultraviolet disinfection

• Working by ozone adapts for the preliminary water treatment from the open sources (river)

As the preservative of drinking water ozone is not mentioned (only carbon dioxide, silver, iodine). Installation charge of reverse osmosis (purification of water to "zero") about 20000 thousand Euro- to 1000 liters).